Date of Sale NOW

Closeout Deals

Selmer Pad Closeout

Closeout Black Cone Reso

Used National Torches

Used Veriflow Bunsens

Discontinued Items

While the threads (3-48) and diameter of the shaft (.068") ARE the SAME, they ARE different, overall. The head is .160" dia. vs. .125" dia. and the shaft is .240" long vs. .162" long.
Over the years, I have used the Bundy pivot screw as a replacement, but, now you can use an original equipment part. The reproduction screws are sold at about $2.00 each.

Get a Genuine Original for only $1.50 each. Limited!

Text Box: !!While Supplies Last!! GB03 Grab Boxes Each of these grab boxes has well over 275 pads in it! And at least 45 different pad sizes! The best part is that you save a lot of money by buying one or more of these grab boxes. Here’s why, Most of the pads in them are size 49.5mm or larger. Many of them are size 57mm or larger. These are the pads that you may only need one of but usually have to buy a dozen minimum. There are pads with rivets, pads with metal or plastic (both domed & flat) resonators. Some of them are different colors of leather, so you can match them to the sax you are working on. These are same type pads used on Pan American, Conn Director, King Cleveland, King Super 20, Armstrong, H. Couf, etc… !!!You Can’t Lose!!! Each of these GB03 Grab Boxes has at least 5% more than 275 pads in it! Each Box Is Only $99.50 (Value of pads in each box, if purchased separately, is over $320!)

From a cache, just recently discovered while taking inventory, from back when Cliff bought a lot of real Martin factory parts. Pictured are the larger appearing Martin Sax Pivot and a Bundy Sax Pivot.

This smart apron has an adjustable buckle, neck strap and tie in the back waist straps
and NO Dangerous Pocket to get caught and/or entwined and wrapped up by a motor or buffer, for less chance of getting caught.
Embroidered with Ferree's NEW 2006 logo.

These High Quality aprons are Repairman Blue and are just $22.50 each +s/h

Part No. C15B1

The Erick Brand book, "Band Instrument Repairing Manual", has been faithfully reprinted by Ferree's since 1993, to help newcomers. Many pictures, etc.
~(Part reference, "EB3")~
Also available; 0riginal, "Ferree's Repair Manual", from the 0riginal, Ferree's Repair School. This rare book has now been re-edited, typo-corrected and reprinted and is NOW again available. There are NO pictures, just lots of information, in easy to read, lay terms and divided into chapters so you can easily look up what you are most interested in. A great, intense reference for repairing.

~(Part reference, "REP")~
Newly available: "String Repair for the Band Instrument Repairman", by Richard Ervin. Rich is a trained and certified Luthier with German roots. He is also and has been a Band Instrument Repairman for over 20 years and currently runs a 4 man repair shop.
~(Part reference, "ERV")~

Books to learn from:

1.) Ferree's Repair Manual, $30.00 - Part# REP
(from the original Ferree's Repair School)
2.) Eric Brand Repair Manual, $24.95 - Part# EB3
(like 0riginal Erick Brand / Selmer Edition)
3.) Ervins Sting Repair Manual, $29.95 - Part# ERV
("The String Repair Manual for the Band Instrument Repairman")

~Parts needed~

If you can help someone else find a part, maybe someone can help you. We are not involved in any potential transactions.

We are only acting as an advisory of need. Conduct your business with all 'normal cautions'.

Wanted: Bridge Bar Key (holds adg. key for G# & Bis key) 73xxx Tenor Mark VI

Please E-Mail me at Dougdehays@gmail.com

We're on the lookout for Conn 10M or 12M necks (pre 1960).
We're so desperate, we'll even check out the Pan American
Tenor or Bari necks of the same era.
Please Email photos and asking prices to:
wbic@wichitaband.com - ask for Jesse.

~Neck w/octave key for a Millereau G tuning saxophone. Contact Earl Nash in Ontario, Canada at 519-326-5626.

~Neck for a Selmer Balanced Action tenor sax, 49,000 serial number. Contact Kenny Snodgrass at 940-565-0715 or bargainbandinstruments@verizon.net.

~Key guards for a 1947 King Super 20 tenor sax. Contact Denis at 802-763-8289 or vermont1777@myfairpoint.net

~Complete set of 3 pistons for Conn 48A Vocabell cornet.

Contact Paul at bulos@earthlink.net or call 954-321-9369.

~Neck for Bundy/Buescher bari . Sax.

Contact: dorschnermusic@new.rr.com.

~Buescher, caramel colored rollers for Aristocrat 1 alto sax. Three short (1/2”) rollers for spatula keys. Contact Larry at leclifford@verizon.net.

~Neck for a Mark VII tenor sax. Contact Jim at aspros@sbcglobal.net.

~Neck for Linton baritone sax, model 9R. Contact Ben at 949-823-9497.

~Neck for Martin “The Indiana”.

Contact Henry Sherman at henrymusicman@yahoo.com.

~Used, 3rd-valve piston, caps, stem and button for a silver Conn 15J side-action tuba. This is the same part as the 5J and 11J. Contact Nathan at 859-823-0873.

~Neck for Conn 16M tenor sax.

Contact Ed at Wright’s Music Shed, wmshed@verizon.net.

If a Ferree Tool fails, you will likely never see it.
We test every design before release. To some companies R & D means Receive and Duplicate. We have had some companies copy our tools with no R & D or testing at all, in some cases, not even knowing how to use them. When you buy what seems like an identical tool and pay more for it, how did you gain?
What Ferree's is doing for you and how: Service, Experience, Acumen, Involvement, Creativity, Quality, Innovation, Dedication, Expertise, Attention to Detail, Research & Development, Testing and Improvement.
Let us help YOU.
R & D= Research AND Development Call 1(800) 253-2261

From: Gene Malyshewski <malygene@gmail.com>
Hello there,

I'm looking for new or used bell for Bach Stradivarius 37 ( or other number ) bell for silver plated trumpet... Let me know if you can help me with that... Thanks,
Gene ( Toronto, Canada)

----Original Message-----
From: marty <martotibi@hotmail.com>
To: ferreestools <ferreestools@aol.com>
Sent: Sun, Feb 12, 2012 4:13 am
Subject: Mailer

hello,

i'm looking for a tenor saxophone NECK selmer balanced. let me know!

my email: martotibi@hotmail.com

tibo

For Orders & Acct-

Ph.: 1-800-253-2261 or 1-269-965-0511

Fax: 1-269-965-7719

You Can Also Email us at : ferreestools@aol.com

Buescher TruTone parts needed! The octave key on the neck and the “sliding bar” portion of the octave key on the body (two pieces). It would be great if I can also find an original set of rollers for this 1920s vintage horn! Finish (lacquer, silver, gold) doesn’t matter because I need to have the keys replated. michael@woodwindshop.com

Michael

626-794-9571

Cleveland Reamer Sets are now discontinued and are being replaced with the popular Chadwick brand.

We have only (1) set of blades left for the following sizes:

Your Cost is Just $70.00 a set

N134A Letter F 25/32” - 27/32”

N135A Letter H 15/16”- 1-1/16”

N136A Letter I 1 1/16”-1-3/16”

We also have some nuts for Letter “E”(2) Your Choice For $8.00 each

“F”(1)

“G”(2)

“H”(1)

Chadwick AMERICAN MADE ADJUSTABLE REAMERS ARE REPLACING THE CLEVELAND BRAND THAT WE ARE DISCONTINUING.

Note: Replacement blades are only available thru special order Please call for current pricing on all Blades.

Date of Sale NOW

~Parts needed~

If you can help someone else find a part, maybe someone can help you. We are not involved in any potential transactions.

We are only acting as an advisory of need. Conduct your business with all 'normal cautions'.

We're on the lookout for Conn 10M or 12M necks (pre 1960). We're so desperate, we'll even check out the Pan American Tenor or Bari necks of the same era. Please Email photos and asking prices to: wbic@wichitaband.com - ask for Jesse.

Ferree's Tools-"Because they work!"

We're on the lookout for Conn 10M or 12M necks (pre 1960).
We're so desperate, we'll even check out the Pan American
Tenor or Bari necks of the same era.
Please Email photos and asking prices to:
wbic@wichitaband.com - ask for Jesse.