|
For Orders & Acct- Ph.: 1-800-253-2261 or 1-269-965-0511 Fax: 1-269-965-7719 You Can Also Email us at : ferreestools@aol.com |
|
2012 Catalog |
|
N79 FLUTE PAD HOLE PUNCH SET
The N79 set is designed to punch larger holes in standard flute pads for use on open hole French type flutes, so that Repairmen need not carry two complete flute pad stocks. A set includes a punch and two brass centering dies to hold the pads. Since each centering die has a different pad size on each end, there is a total four pad sizes available. The punch will automatically center itself and punch a neat hole when hit with a rawhide mallet. Be sure to use a P28 Cutting Pad or an L24 Lead Block to protect the cutting edge of the punch. The special N79Y optional punch, is used to enlarge the hole in some flute pads having too small a hole to fit in Yamaha flutes with their raised flange spuds. All Ferree’s pads fit without alteration.
N79 Flute Pad Hole Punch Set………………….$62.50 N79P Flute Pad Hole Punch Only………………$19.50 N79Y Yamaha Flute Pad Hole Punch Only….$19.50
|
|
P30 CORK PAD CUTTERS
A series of cutters for making cork pads. They come in .5 mm steps from 6.5mm thru 16mm. The P30 cutters can be turned by hand, holding them perpendicular to the cork. Or, you can put a cutter in the drill press (to hold it more firmly) and turn the drill press by hand.
P30 Cork Pad Cutters-Individual sizes……..$22.50 state size wanted.
P30S Set of any 10 Cork Pad Cutters………$202.50 You select the sizes.
|
|
G16 & G17 PUNCHES
These are small and easy to use. Precision ground Chrome Vanadium steel. 4” (102mm) long.
CENTER PUNCH G16 Small Point…………….....$11.40 G16A Medium Point…………..$11.50
DRIVE TAPER PUNCH G17 Small Point………………..$4.30 G17A Medium Point…………..$3.70
|
|
P28 CUTTING PAD
Made of resilient vinyl plastic and measuring 2-1/2” (63.5mm) square, these tough P28 vinyl Cutting Pads are ideal for use with the N79 Flute Pad Punches and the P30 Cork pad Punches. Preserve s the cutting edges. Pads are long-wearing and can be used on both sides. Cutting pads must be used on a solid base for the best results.
P28 Cutting Pad……………………$6.50
|
|
G18 AUTOMATIC CENTER PUNCH
Mark hole centers, while keeping one hand free. Spring inside helps strike the blow. Striking force is adjustable.
G18 Automatic Center Punch…………..$23.50 G18A Extra Point………………………..…..$3.80
|
|
WOODWIND TOOLS |
|
Copyright © 2001 Ferree's Tools, Inc. Last modified: January 14, 2013 |
|
Page 93 |