New L16 Large
"European Style"
Hand Draw Rings
Some call these rounding rings, and they are.
Additionally, you can use these rings to remove
dents
and re-contour and smooth large tubing.
These are the L16 European Draw Rings. There are 16 sizes in each set.
The sizes are:
L16A 36mm $ 39.50 Speaking as
someone who has reversed
B 41mm 44.50
large tubing, I can tell you, that although
C 46mm 44.50 not particularly easy, you can turn tubing
D 51mm 44.50 around to go the other way. It is quite
an
E 56mm 58.50
amazing sight to see. I used large draw
F 61mm 58.50
rings with the tubing being left hollow.
G 66mm 58.50
Some years ago, I did completely
H 72mm 94.50 reverse a Rudolph Meinl BBb 4 valve
J 82mm 94.50 tuba for a fellow over at the University
K 92mm 94.50 of Michigan who had all the fingers on
L 102mm 99.50
his right hand cut off while doing his
M 112mm 99.50
"summer job". The tuba, was just a few
N 122mm 102.50 months old, quite costly and he could
P 132mm 102.50 not replace it. So, I reversed it, including
Q 142mm 107.50 all the valve tubing, over a week end.
R 152mm 107.50
Some years later, I met Mr. Meinl and
Individual Total $1,251.00 and he asked me why I just didn't buy the
Complete L16S is $1,125.00 fellow a new left handed one. "He had No
You Save $126.00 money," I replied, "and I like a challenge."
I also used the smaller L15B
style draw rings to reverse the valve slide tubing.
Ferree's Tool's-"the most copied tools in the world"
|
