Ferree's New Z60/61/61E Type
allied & strege/wuttke adapters
Ferree's parts numbers Z63 & Z65, see below Ferree's Z67
Adapter Rod for national, novus, bullock,
myers or Texas type machine also below, scroll down.
Daryle Vinson of Amro Music's
Band Repair Service in Memphis, Tenn.
Amro has an old strege/wuttke dent machine.
Their shop manager, Cliff, called to see if we could
get our great Power Disc's to work on it. Coincidentally, we had been working on this project already,
via an old allied machine we had acquired. The two machines are very similar, with the
s/w being, kind of a later version. The s/w has 2 mechanical improvements, to
help make it more
controllable, like the trailer hitch head connection, instead of just a bolt,
and a keyed leg on the base arm.
Cliff sent me some 11x14 photos showing the machine they had and we built the
necessary components to compensate for the differences between the two.
Then, Daryle called to come to the
dent machine seminars Gary was putting on. After two days, he got completely outfitted with all
the things he needed to do Sousas and Tubas, as well as all the smaller
brass along with a few of the newer hand tools that were also
demonstrated. Daryle used all the accessories, some on one of our machines and
some on the one similar to his for proper set-up and execution. All the
little tricks were revealed. By the way, the hand tools were the
N87A Trombone Pliers, and P53 Trombone slide dent ball
driver-retriever.
We now have adapters for the
discontinued allied, strege/wuttke and old bullock, novus, national, Texas type machines to improve their results.
You could
say that, WE ARE--
BRINGING UP THE PAST
WE DESIGNED THESE ADAPTERS TO UPDATE THE OLD
ALLIED AND STREGE/WUTTKE DENT MACHINES, to help YOU use them with our SUPER NEW POWER DISCS
AND ROLLERS AND THE ADJUSTABLE TUBA ARM AND SOUSA RODS from the Z60/61/61E.
You can BRING THESE OBSOLETE AND DISCONTINUED MODELS INTO THE 21rst
CENTURY. It takes a little over $1,100.00 for the adapters to bring those old
discontinued
machines up to where they can accept this new tooling. But then, you will
have a machine that will do about 80% of what a New Z60 or Z61/61E can do.
This will save you money; you will then have all the modern tooling and if someday you
acquire a Z60/61/61E, all your specialized accessory tooling will fit it. Saving you even more,
because you won't have to replace it all over, again. There will still be some
jobs these old machines won't do, but they will be able to do about 60 to 70%
more than
they can do now.
The
prices for the updates are below, with pictures and options. The Ferree's
options (Power Discs, etc.) must be purchased separately.
Listed below are pictures and descriptions of the various adapters and their functions
with the two machines. In some cases you have a choice of which way you
want to proceed. If you have any questions: Call our Instruction Line at (616)
965-0511 and Gary, Steve or Curtis can help you.
Now you can do work, faster, easier,
better
and more profitably with your old discontinued machine.
Here are all the Upper Adapters. Here is the Bottom Leg Adapter.
S/W trailer hitch style quill holder (Z65-1).
(Z63-2, Z65-2) Original style in back.
The Allied bolt-on style (Z63-1)is in the
middle. The S/W
and Allied units take the
Adapter arm (Z63-9D)is in the stock quill,
right. same
leg and use all our rods.
The Z63-9A
(Allied) and Z65-9A (S/W) adapter arm on the left fits our quill.(Z60-2)
There are 3 different arms for the various quills. Allied (Z63-9C early,
Z63-9D late.)
The S/W arm is Z65-9D. These arms are used with the stock
Allied or S/W quills.
NOTE: The NEW Ferree 'Speed-Adjust'
feature on these.
Here is the Z60-25 Power Disc on Here, the same
Z63-9D mounted
the Z63-14 rod with the Z60-29 with
the Z60-36 tuba roller
and
in the Z63-9D arm and the late Z61-11 tuba arm with a
Z61-13D
Allied
quill.
aluminum ball.
Again, same Z63-9D arm using the other This is just a shop
photo
hole to allow removing dents from inside showing
the relationship
of a bow curve, still with the stock
quill. of some of the
adapters.
Now, both the Strege/Wuttke and Allied machines work even better!
Here is our precision Z60-2 quill Here
are all the adapters, etc.,
and Z63-1. Notice the two holes the Z63-9D arm, Z63-14
rod and
in the Z63-9A arm.
the Z61-11 adjustable tuba arm.
All adapter arms have two holes to correct for the small work opening that exists on
both these old type machines.
SPECIAL
NOTE: The old National, Novus or Bullock, Texas-style machines suffered this same problem,
which we corrected about two years ago when we made a special rod for several
repairmen so they
could utilize Ferree's all New Power Discs and rollers with their old style machines.
This rod is now readily available as Z67
and costs only $79.50+s/h
All prices are: +s/h Please, Call for any explanation you may need.
Note: All Z63's are for allied machines; Z65's are for S/W's
Z63-14 Straight Mandrel (w/interchangeable end). .$ 42.50
Z65-14 Straight Mandrel (w/interchangeable end). .$ 42.50
Z63-2 Bottom Leg. . . . . . . . . . . . . . . . . . . . . . . $312.50
Z65-2 Bottom Leg. . . . . . . . . . . . . . . . . . . . . . . $312.50
Z61-5 Mandrel Clamp w/nut . . . . . . . . . . . . . . . . $139.50
Z63-3 Alignment tool. . . . . . . . . . . . . . . . . . . . . .$ 46.50
Z65-3 Alignment tool. . . . . . . . . . . . . . . . . . . . . .$ 46.50
Z63-9A Ferree type L-Arm . . . . . . . . . . . . . . . . . $ 69.50
Z65-9A Ferree type L-Arm . . . . . . . . . . . . . . . . . $ 69.50
Z63-9C L-Arm adapter, early allied. . . . . . . . . . . . $ 69.50
Z63-9D L-Arm adapter, late allied. . . . . . . . . . . . $ 69.50
Z65-9D L-Arm, S/W type. . . . . . . . . . . . . . . . . . . $ 69.50
Z60-2 Precision Pressure Wheel (Quill). . . . . . . . . $407.50
Z63-1 Pressure Wheel Adapter. . . . . . . . . . . . . . . $124.50
Z65-1 Pressure Wheel Adapter. . . . . . . . . . . . . . .$142.50
If you only want to use the Power Discs and
rollers, while using your stock quill assembly,
you will only need:
A Z63-14 or Z65-14 Straight Mandrel @ $42.50
And a Z63-9C,Z63-9D or Z65-9D L-Arm adapter @ $69.50
Total for
this change over $112.00
If you want to Update to a precision Ferree 'quill'
to use all the new Power Discs and Rollers you
are going to need:
A Z63-14 or Z65-14 Straight Mandrel @ $42.50
A Z60-2 Precision Pressure Wheel (quill) @ $407.50
A Z63-1 or Z65-1 pressure wheel adapter @ $124.50 allied or $142.50(S/W)
A Z63-9A or Z65-9A Ferree type L-Arm @ $69.50
Total for
this Updated change over $644.50 allied or $662.50(S/W)
If you want to add the leg to use the sousa rods or tuba arm, you will need one of the above
set-ups and:
The Z63-2 or Z65-2 Leg @ $312.50
The Z61-5 Mandrel Clamp @ $142.50
The Z61-8 Setting Nut @ $ 23.50
Total for the Base change over $478.50
In other words; for about $1,125.+s/h (allied) OR about $1,140.+s/h
(S/W) you will basically have a nearly new dent machine, capable of
using ALL the latest up to date Ferree's tooling to help you become more efficient and
making your machine more profitable.
Ferree's Tools-"Designed
to Work!"
|
