Description of Image. 

Quick Links

Price List

Back To Basics

Closeout Deals

Ferree Press

Repair Tips

Tool Instructions

Tools By Name

Tools By Number


You can help out a fellow repairman by checking out their parts need posts at the bottom of our Ferree Press page.

Short description of image.

Short description of image.

To receive our Weekly  E-Flyer
Just click the button

Ferree Press

Woodwind Tools 

Drill bits and Cutting Tools

D100D100  115 PIECE H.S. DRILL BIT SET

The most complete set of high speed drill bits on the market. Three complete sets in one box including:

1. Sixty piece set of number drills 1 thru 60

2. Twenty six piece set of letter drills A thru Z

3. Twenty nine piece set of fractional drills 1/16” thru 1/2” (1.6 thru 12.7mm)

4. Sturdy steel case

Item #

Description

Price

D100

High Speed Drill Bit Set

$146.50

sample photoSTRAIGHT SHANK DRILLS

High speed drills with precision sharpened tips and edges. Indexed case permits instant selection of the drill.

Item #

Description

Price

D101

No. 1 thru 60. 60 drills in a set

$77.50

D118

No. 60 thru 80. 20 drills in a set

$29.80

D102

1/16 thru 1/2 by 64ths. 29 drills in a set

$99.30

sample photoD103 & D104 WIRE DRILL GAUGE

Speed up the determination of drill sizes when they are unmarked or mixed up.

Item #

Description

Price

D103

For 1 to 60 drills

$13.20

D104

For 61 to 80

$15.30

sample photoD220W &  INDIVIDUAL DRILLS WIRE GAUGE SIZES

Individual drills are available from size 1 thru 80. Specify size you want.

D220W Individual Wire Drills (Specify Size)

Drill Size

Price

Drill Size

Price

1-6

$3.50

31-35

$1.95

7-12

$2.50

36-56

$2.00

13-17

$2.40

57-68

$2.50

18-20

$2.30

69-74

$2.30

21-24

$2.20

75-80

$3.00

25-30

$2.00

 

 

sample photoD220F FRACTIONAL SIZES

Individual drills available in fractional sizes. Specify the size you want. Drills are available from 1/16” thru 1/2” graduated in 64ths of an inch.

 

CLIFFS TIPS… Use a D220W,l #55 drill and a D200, 0-80 Tap to drill and tap keys for flat spring screws.

 

D220F Individual Fractional Size Drills (Specify Size)

Drill Size

Inch

Metric

Price

1/16”

0.0625

1.287

$2.00

5/64”

0.0781

1.983

$2.00

3/32”

0.0937

2.380

$1.20

7/64”

0.1093

2.776

$3.00

1/8”

0.1250

3.175

$1.80

9/64”

0.1406

3.5719

$2.20

5/32”

0.1563

3.9688

$2.20

11/64

0.1719

4.3656

$1.80

3/16”

.1875

4.762

$2.30

13.64”

0.2031

5.1594

$1.40

7/32”

0.2188

5.5563

$2.60

15/64”

0.2344

5.9531

$1.60

1/4”

0.2500

6.350

$2.90

17/64”

0.2656

6.7469

$3.30

9/32”

0.2813

7.1438

$2.60

19.64”

0.2969

7.5406

$4.10

5/16”

0.3125

7.9375

$2.90

21/64”

0.3281

8.3344

$3.20

11/32”

0.3438

8.7313

$3.70

23/64”

0.3594

9.1281

$5.20

3/8”

0.3750

9.5250

$6.00

25/64”

0.3906

9.9219

$4.70

13/32”

0.4063

10.3188

$4.80

27/64”

0.4219

10.7156

$5.20

7/16”

0.4375

11.1125

$7.80

29/64”

0.4531

11.5094

$6.60

15/32”

0.4688

11.9063

$6.60

31/64”

0.4844

12.3031

$7.00

1/2”

0.5000

12.7000

$7.00

sample photoD220L LEFT HAND DRILL BITS

Left hand drill bits are handy whenever you are drilling a screw or a bolt in order to use a screw extractor.

If you drill the hole with a left hand drill bit and the bit catches, it will back the screw out of the hole. Remember to use left-hand drill bits only with your drill motor running in reverse. Available sizes are:

1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”, 5/32”, 11/64” and 3/16”.

D220L Left hand Drill Bit (Specify Size)

Drill Size

Inch

Metric

Price

1/16”

.0625”

1.287

$4.10

5/64”

.0781

1.983

$4.20

3/32”

.0937

2.380

$4.30

7/64”

.1093

2.776

$4.30

1/8”

.1250

3.175

$4.40

9/64”

0.1406

3.5719

$4.30

5/32”

0.1563

3.9688

$4.30

11/64”

0.1719

4.3656

$5.00

3/16”

.1875

4.762

$4.90

sample photoTAP WRENCH

Adjustable tap wrench. Top centered for use on back center of a lathe when that is revolving in a chuck.

Item #

Description

Price

D108

Tap Wrench

$5.20

D108A

Tap Wrench 1/4-1/2”

$8.70

sample photoDIE STOCKS

13/16” (20.6mm) die stock to holds D210 dies D120D metric up to 4mm.

1”(25.4mm) holds 5mm and up.

Item #

Description

Price

D109

Die Stock 13/16” (20.6mm)

$8.30

D109A

Die Stock 1” (25.4mm)

$7.30

sample photoTAPS AND DIES (DOMESTIC THREADS)

We have all sizes of taps and dies available for most musical instruments. Taps and dies are listed with corresponding drill sizes. Dies have 13/16” (20.6mm) outside diameter.

 

TAP AND DIE SETS

Complete set of domestic thread taps and dies in a plastic box.

Item #

Description

Price

D200D

Set of Taps and Dies (No drills)

$397.50

METRIC TAPS AND DIES

sample photoD120T

Woodwind

 

 

Tap

Size

Price

1.6

.35

$17.70

1.7

.35

$17.80

2.0

.25

$11.50

2.0

.40

$16.80

2.2

.45

$14.70

2.5

.45

$10.60

3.0

.50

$8.60

Brasswind

 

 

3.0

.60

$14.80

3.5

.60

$7.50

4.0

.70

$7.20

4.0

.75

$8.30

5.0

.80

$7.20

6.0

1.00

$7.30

8.0

1.25

$8.50

sample photoD120D

Woodwind

 

 

Die

Size

Price

1.6

.35

$30.10

1.7

.35

$30.20

2.0

.25

$26.50

2.0

.40

$23.10

2.2

.45

$23.50

2.5

.45

$23.10

3.0

.50

$23.80

Brasswind

 

 

3.0

.60

$26.50

3.5

.60

$23.10

4.0

.70

$23.10

4.0

.75

$21.20

5.0

.80

$23.10

6.0

1.00

$23.10

8.0

1.25

$23.10

sample photoD120 Metric Tap & Die Set

Item #

Description

Size

Price

D120A

Metric Tap & Die Set

1.6-.35 thru 3.0-.50

$279.20

D120B

Metric Tap & Die Set

3.0-.60 thru 8.0-1.25

$239.00

sample photoD200 Taps And D210 Dies

D200 Taps

Price

Drill No.

D210 Dies

Price

0-80

$11.00

55 or 56

0-80

$9.70

1-56

$16.30

54

1-56

$15.00

1-64

$15.80

53

1-64

$9.70

1-72

$12.30

53

1-72

$9.70

2-56

$4.50

50

2-56

$15.20

2-64

$11.50

50

2-64

$9.70

3-48

$8.70

47

3-48

$9.70

3-56

$3.80

45

3-56

$9.70

4-36

$7.20

44

4-36

$9.70

4-40

$3.00

43

4-40

$9.70

4-48

$7.60

42

4-48

$9.70

5-40

$3.00

38

5-40

$9.70

5-44

$3.00

37

5-44

$9.70

6-32

$3.00

36

6-32

$9.70

6-36

$16.00

34

6-36

$15.00

6-40

$6.00

33

6-40

$9.70

8-32

$3.00

29

8-32

$9.70

8-36

$3.50

29

8-36

$9.70

8-40

$3.00

28

8-40

$15.00

10-24

$3.00

25

10-24

$9.70

10-32

$3.30

21

10-32

$9.70

12-24

$3.50

17

12-24

$9.70

12-28

$6.50

15

12-28

$9.70

12-32

$3.70

13

12-32

$15.00

1/4-20

$3.60

7

1/4-20

$9.70

1/4-24

$3.60

4

1/4-24

$17.20

(1” O.D.)

 

 

5/8-27

$42.00

5/8-27

$55.40

 

7/8-27

$47.70

7/8-27

$44.40

 

 

 

sample photoSCREW PITCH THREAD GAUGES

This gauge has 24 blades covering .025” to 6.mm pitch. This is for gauging of American National or U.S. Standard 60 threads. Precision made set of 51 screw pitches combining all sizes from 4 to 84, including 11-1/2 and 27 Pipe Thread size in a case.

Item #

Description

Price

G15

Thread Gauge

$44.90

G11

Metric Thread Gauge

$23.70

sample photo G64 HAND DRILL

Reasonably priced drill has 3 jawed chuck and holds 0 thru 1/4” (6.4mm) round shank drills.

Item #

Description

Price

G64

Hand Drill 

$31.40

Cutters  And Reamers

sample photoD20 & D21 SOLID HINGE TUBE SHORTENERS

Used for the same purpose as tubular hinge tube shorteners, except these are for solid hinge tubes.

Item #

Description

Price

D20

Small Solid Hinge Tube Shortener

$14.50

D20H

Shortener with handle

$15.50

D21

Large Solid Hinge Tube Shortener

$14.50

D21H

Shortener with handle

$15.50

sample photo D29 TUBULAR HINGE TUBE SHORTENERS

Five sizes of hinge tube shorteners. Used to both shorten and square up tubular hinges. Use after swedging when you are fitting between the posts.

Pilot Size

Item #

Description

Price

D29A

For small oboe, no handle .059” 

$13.50

D29AH

For small oboe, with handle

$14.50

D29B

For medium oboe, no handle .067” 

$13.50

D29BH

For medium oboe, with handle

$14.50

D29C

For small clarinet, large oboe, . 075” no handle

$13.50

D29CH

For small clarinet, large oboe with handle

$14.50

D29D

For large clarinet, flute, small .085” saxophone, no handle

$13.50

D29DH

For large clarinet, flute, small saxophone, with handle

$14.50

D29E

For large saxophone, no handle .106” 

$13.50

D29EH

For large saxophone, with handle

$14.50

D29S

Set of five Tubular Hinge Tube Shorteners, no handles

$61.50

D29SH

Set of five Tubular Hinge Tube Shorteners, with handles

$65.50

d31d31sm  D31 HOLLOW HINGE TUBE SHORTENER KIT

This set contains 16 replaceable pilots, graguated in .005" steps with an efficiently designed, smooth working, precision ground cutter, which does not require 2 blades to do only one job.

 

 

Item #

Description

Price

D31

HOLLOW HINGE TUBE SHORTENER KIT

 $219.50

sample photoD32 BROACHES

Item #

Description

Price

D32A

Set of 2 pentagonal spring broaches used to enlarge spring holes when larger springs must be fitted.

$8.30

D32B

Set of 2 pentagonal spring broaches used to free ends of hinge tubing if they bind after swedging.

Uses O11 handles. Also works on flutes.

$10.20 set

sample photoD15 PIVOT SCREW COUNTERSINKS

New design Pivot Screw Countersink. We now have many more sizes to fit the multiplying screw head diameters, precisely. All are assembled with smooth, finished wood handles for precision metal removal.

Constructed of high carbon tool steel which has been tempered to hold a sharp cutting edge with minimum breakage. The countersink shaft is 11” (27.9cm) long for easy access to posts. These tools can be bought each size separately or by the set.

Item #

Description

Price

D15-1

.085” Countersink (2.16mm)

$16.00

D15-2

.092” Countersink (2.23mm)

$16.00

D15-3

.099” Countersink (2.51mm)

$16.00

D15-4

.106” Countersink (2.69mm)

$16.00

D15-5

.112” Countersink (2.84mm)   

$16.00

D15-6

.120” Countersink (3.05mm)    

$16.00

D15-7

.127” Countersink (3.23mm)    

$16.00

D15-8

.139” Countersink (3.53mm)    

$16.00

D15-9

.148” Countersink (3.76mm)   

$16.00

D15-10

.157” Countersink (3.99mm)  

$16.00

D15-11

.168” Countersink (4.27mm)

$16.00

D15S

Set of 11 Countersinks

(Handles are included)

$159.50

sample photo E47 PIVOT SCREW KEY REAMERS

Set of three pivot screw key reamers provide a wider size range. Better cutting angle.

Item #

Description

Price

E47

Set of Pivot Screw Key Reamers  

$19.50

E47H

Set of Pivot Screw Key Reamers with handles

$22.50

sample photo E57 POST BODY COUNTERSINKS

These make a flat seat when replacing post in graft or replacing with larger threads. Knurled for hand operation. Also adjusts seats so posts can be lined up. E57A: .226” D (5.74mm) and E57B .312” D (7.92mm).

Item #

Description

Price

E57A

Small Post Body Countersink

$14.50

E57B

Large Post Body Countersink

$14.50

sample photoE67 POST LOCKING SCREW COUNTERSINK

The E67 Post Locking Screw Countersink is used to drill and countersink the proper size hole when installing a post locking screw. The countersink duplicates the taper on the bottom of the screw head. The pilot drill is correct size for C50 Wood Screws. Drill is adjustable for hole depth and can be removed for sharpening or replacement.

Item #

Description

Price

E67

Post Locking Screw Countersink

$32.50

sample photoE68 & E69 POST BODY COUNTERSINKS

These two post body countersinks and thread pilot drills are used to countersink the post flange into the instrument body after a new socket graft has been installed. The adjustable drill can be removed for sharpening or replacement.

Item #

Description

Price

E68

Post Body Countersink and Drill 5.8mm

$33.50

E69

Post Body Countersink and Drill 6.5mm

$33.50

sample photo E31 INSIDE BORE TOOL

This boring bar has a cutter that can be reground for sharpness. Tool is used to bore exact inside diameter when making new tenon replacement plugs or new socket graft sleeves for joint repairs.

Item #

Description

Price

E31

Boring Bar complete (3/8” {9.5mm} shank)

$21.50

E31A

Replacement Cutter for E31

$10.50

sample photo E81-E85 TONE HOLE PAD SEAT FILES

Perfectly ground, razor sharp edges, negative rake to prevent gouging. Use to remove small chips from tone holes of wood, rubber and plastic clarinets.

Item #

Description

Price

E81

1/4” (6.4mm)   

$10.20

E82

1/2” (12.7mm)   

$16.00

E83

5/8” 915.9mm)   

$17.70

E84

3/4” (19mm)   

$28.00

E85

1” (25.4mm)   

$41.80

sample photo E197 & E198 PAD SEAT REAMERS

From the original blueprint we acquired with Erick Brand’s archives, these 2 sets of angled pad seat reamers are for very specialized work.

The smaller ones come in a set of 3 for Soprano Clarinets and Oboes and the larger set of 2 are for Alto and Bass Clarinets.

Item #

Description

Price

E197

Pad Seat Reamers(set of 3)

$124.50

E198

Large Pad Seat Reamers(Set of 2)

$119.50

sample photoG50-G52 BASSOON TENON TOOLS

These tools work similarly to the G84 Clarinet Tenon Tools, except that they have tapered pilots instead of cylindrical pilots.

Item #

Description

Price

G50

To replace the tenon on bassoon tenor joints,

(also known as the wing joint)

$99.50

G50RC

Replacement Cutter Only

$32.50

G51

To replace the tenon between the bass joint and the boot joint

$114.50

G52

To replace the tenon between the bass joint and the bell

$117.50

sample photoG53 & G54 CLARINET TONE HOLE UNDERCUTTERS

This tool was developed at the request of several Repairmen. These Repairmen had been getting requests to undercut the tone holes on bass and soprano clarinets. Accomplished players feel that this undercutting improves the tone, response and clarity of many of the notes on the clarinet.

This tool accomplishes the undercutting that is already standard on many French manufactured clarinets. Now you can perform the procedure on any clarinet.

Ferree’s G53 Soprano Clarinet Tone Hole Under cutters and G54 Bass Clarinet Tone Hole Under cutters make this undercutting a simple task.

1. Choose one of the G53 or G54 Under cutters that matches the tone hole you will be cutting.

2. Slide the keyed slot in the bottom of the cutter over the keyed part of the insertion rod.

3. Slide insertion rod (with the cutter resting on it) into the end of the clarinet joint. By looking thru the tone hole, stop the cutter directly under the hole you will be working on.

4. Insert the threaded T handle down thru the tone hole and screw it into the under cutter.

5. Pull out the insertion rod from the clarinet joint.

6. After the hole has been undercut, return the insertion rod into the clarinet joint and insert the keyed end back into the key way in the under cutter. (Cont. top of next column)

7. Now you can unscrew the T handle from the cutter and pull out the insertion rod out of the clarinet. The cutter will come out with the rod.

8. While holding the clarinet joint, pull up on the T handle and twist it clockwise. This will pull the under cutter against the inside of the tone hole. The clockwise turning will remove the material making a perfect tapered opening. It normally only requires a few turns of the handle (5 or 6). Not a lot of upward pressure is necessary.

A G53 Soprano Clarinet Under cutter set consists of the insertion rod, three T handles, and six precision cutters.

A G54 Bass Clarinet Under cutter set consists of the insertion rod, two T handles and seven precision cutters.

Item #

Description

Price

G53

Clarinet Tone Hole Under cutter  (6 cutters)

$354.50

G54

Bass Clarinet Tone Hole Under cutter (7 cutters)

$329.50

G54A, B

Individual handles for G54  

$14.50

G54C

Insertion Rod for G54  

$21.50

G55

Insertion Rod-Alto Clarinet  

$24.50

 

sample photo G86 CLARINET TONE HOLE REPLACEMENT CUTTER SET

The G86 cutters are used to machine a flat bottomed relief or socket, which will accept the tapered tone hole or raised tonehole chimney. You will make from an ABS rod or other material on a small lathe.

A set consists of 11 cutters and 33 brass pilots.

The cutters are made from tool steel, hardened for maximum durability.

We recommend this new tool be used with the G74S Tone Hole Jig, which we have made for many years.

The G74S should be clamped to the table of a drill press and the clarinet joint mounted for maximum rigidity while boring the socket.

The large variety of brass pilots included make a good tight fit possible in any diameter tone hole. They center the cutter with the hole and help guide the cutter in for a straight reveal.

The two flute design of the cutters, along with the brass eliminate all chatter that occasionally occurs with a fly cutter. Cutters run in size from 13/32” (10.3mm) thru 23/32” (18.3mm) in 1/32” (.8mm) steps.

Set comes complete with a divided box which keeps the cutting edges from becoming damaged and keeps pilots from becoming lost.

Item #

Description

Price

G86

Clarinet Tone Hole

Replacement Cutter Set

$519.50

G87P

Pilots only for G86 & G87

$6.00ea

( The pilots go in .010” (.25mm) steps from .180” thru .500” (4.57mm thru 12.7mm).

Specify size.

sample photoG71 BELL TENON SETS

The taper of the arbor fits clarinet bores better and acts as a pilot; making a more accurate cut with less chance of the cutter drifting off center.

The cutter is held in the lathe chuck and reversed to make the step cut, if necessary. You can do a better finished job than by trying to thread a new tenon in, or some other method. These tenons, when glued in with G19 Clear Magic, are as strong or stronger than the original tenon was in many cases.

Item #

Description

Price

G71B

Bell Tenon Set   for Bb soprano clarinet

$122.50

G71E

Bell Tenon Set   for Eb soprano clarinet

$107.50

 

G19 Clear Magic  

$18.00

 

REPLACEMENT CUTTERS

Item #

Description

Price

G71C

Bb Clarinet Cutter for G71B  

$59.50

G71F

Eb Clarinet Cutter for G71E  

$43.50

sample photoG72 & G73 REPLACEMENT UPPER TENONS

For Soprano Clarinets

Item #

Description

Price

G72A

ABS plastic tenon plug   

$16.50

G72B

Grenadilla tenon plug   

$24.50

For Alto Clarinets

Item #

Description

Price

G72C

ABS plastic tenon plug   

$17.50

G72D

Grenadilla tenon plug   

$24.50

For Bass Clarinets

Item #

Description

Price

G72E

ABS plastic tenon plug   

$19.50

G72F

Grenadilla tenon plug   

$26.50

 

REPLACEMENT LOWER TENONS

For Bb Soprano Clarinets

Item #

Description

Price

G73A

ABS plastic tenon plug   

$16.50

G73B

Grenadilla tenon plug   

$24.50

For Eb Soprano Clarinets

Item #

Description

Price

G73C

ABS plastic tenon plug   

$16.50

G73D

Grenadilla tenon plug   

$22.50

 sample photoG83 ADJUSTABLE  SOCKET REAMER

With the G83 you can resurface or smooth jobs that were done imperfectly in the past. Also good for clean up after socket graft has been performed; for removal of glue in the corner or as a fine adjustment of size. In addition, you can “true to size” to a perfectly round, a warped or an ovaled socket. The G83 works on the mouthpiece, upper and middle sockets. This fine tool features an adjustable depth collar and an adjustable SINGLE cutting blade and sleeve to avoid chattering. An OPTIONAL separate blade and collar are available to allow the G83 to also be used on the bell socket.

Item #

Description

Price

G83

Adjustable Socket Reamer  

$162.50

G83A

Repl. Blade (standard)   

$47.50

G83B

Repl. Blade (.030 over)  

$47.50

G83C

Oversized (.030) blade & sleeve

$59.50

G83S-1

Standard sleeve

$15.50

G83S-2

Oversize sleeve for G83B

$15.50

sample photoG84 SMALL TENON SET

Using a machine lathe, this tool eliminates the danger of splitting a clarinet when making cuts. Maintains a straight even cut of consistent diameter. Cutters are made of high speed tool steel, with maximum chip clearance. Brass pilots can be machined accurately as needed to fit any desired clarinet bore.

These pilots do not cause friction and so eliminate the danger of softening rubber or plastic. The cutters are removable and easily re-sharpened. The set includes the following:

▪Cutter for soprano clarinet work

▪Cutter for shortening barrels

▪Facing cutter, also works on bass clarinet bottom tenons

▪Four soprano clarinet pilots: one for general clarinet use, three uncut

▪Complete instructions

Item #

Description

Price

G84

Small Tenon Set

$134.50

REPLACEMENT PARTS

Item #

Description

Price

G84T

Soprano clarinet tenon cutter 

$21.50

G84B

Barrel cutter 

$21.50

G84F

Facing Cutter 

$27.50

G84BS

Soprano clarinet pilot, uncut 

$12.50

G84A

Alto clarinet cutter 

$21.50

G84BA

Alto clarinet pilot, uncut 

$11.50

G84C

Bass clarinet cutter 

$22.50

G84BB

Bass clarinet pilot, uncut 

$12.50

sample photoG78 CLARINET SOCKET GRAFTING JIG

Used to hold the clarinet in place so that tone holes can be re-drilled in the same location after the graft is installed.

New template system makes simply using a locating pin in a series of pre-drilled movable steel template rings to duplicate any pattern of holes for any brand of Bb clarinet.

Item #

Description

Price

G78

Socket Grafting Jig 

$264.50

G78A

Straight Cutter for Raised Tone Hole 

$27.50

G78B

Angle Cutter for Tapered Tone Hole 

$27.50

G78U

Update for G78- Send in old tool 

$99.50

sample photoG87 TAPERED TONE HOLE CUTTER

The G87 Set of Three Tone Hole Cutters accepts the same pilots as the G86 Clarinet Tone Hole Replacement Set. The G87 cutters can be used to shape the top of tapered tone holes. The cutters are also available individually.

Item #

Description

Price

G87

Set of 3 Tapered Tone Hole Cutters

7 /16” (11.1mm), 1/2” (12.7mm), 23/32” (18.3mm)

$124.50

G87A

7/16” (11.1mm), Tapered Tone Hole Cutter

$47.50

G87B

1/2” (12.7mm) Tapered Tone Hole Cutter

$47.50

G87C

23/32” (18.3mm) Tapered Tone Hole Cutter

$47.50

G87P

Blank Pilots only for G86 & G87

$6.00

 

sample photoPILOTS FOR G87 & G86

The pilots go in .010” (.25mm) steps from .180”

thru .500” (4.57mm thru 12.7mm). Specify size.

Item #

Description

Price

G87P

Pilots only for G86 & G87

$6.00

sample photoG100 OBOE TONEHOLE REPLACEMENT CUTTER SET

The Oboe Tone Hole Cutter Set is a complete set of cutters designed to repair or replace tone holes on oboe joints. This set consists of ten brass pilots, eight flat cutters, and nine “V” angle shaped cutters.

The flat cutters can be used to bore an old tone hole out so a new tone hole can be inserted. This is especially useful when a crack extends through a tone hole causing a leak. The flat cutters can also be used in conjunction with the angle cutters for repairing tone holes that are double cut with a flat section in the center of an angled tone hole. These flat cutters range in size from 5.5mm to 12mm. The cutters are made from hardened tool steel to hold a sharp edge. The pilots are made from brass and can be machined to fit any size tone hole. This fine set of cutters comes in a padded box with a lid, to protect them from being damaged and to keep the pilots from getting lost.

Item #

Description

Price

G100

Oboe Tone Hole Replacement Cutters

$577.50

sample photoG104 BASS CLARINET TONE HOLE CUTTER

This addition to our tone hole cutter line is for the socket tone hole on bass clarinets.

This tapered cutter and brass pilot are the correct sizes for most bass clarinets.

Item #

Description

Price

G104

Bass Clarinet Tone Hole Cutter   

$57.50

G104P

Pilot      

$10.50

sample photoG106 CLARINET BELL TENON REAMER

This Bell Tenon Reamer is designed to reproduce the inside flare radius when replacing the bell tenon on Bb clarinets. It has a unique contoured blade that eliminates the two angle cuts previously made with a boring bar. The cutting blade is made of hardened tool steel and is removable from the tool holder.

Item #

Description

Price

G106

Clarinet Bell Tenon Reamer 

$97.50

G106C

Replacement blades 

$34.50

 sample photoG107 PRECISION BARREL REAMER

With this reamer you can bore out the barrel to match the bore of the clarinet body and you can also match the bore of the barrel to meet the bore of the mouthpiece. Measure accurately so that you don’t overbore the barrel. This tool has been used for several years by repair-men heavily involved in custom clarinet modifications. Used in conjunction with G56 Clarinet Bore Measuring Tool.

Item #

Description

Price

G107

Clarinet Barrel Reamer 

$92.50