New Z60-14D Stem Mandrel
Can make Trumpet and Cornet stems (also called the
tail), the length of tubing between
the back bow of the bell and the first valve, like new; when used with the small side of the
New Z60-23A double roller.
The larger Z60-23B roller for the larger
parts of the trumpet or cornet bell and the trombone stem (using the Z60-15 trombone mandrel that comes with the Z60, as standard
equipment) and larger tubes on other instruments, straight or tapered.
You
also use the slender cornet and trumpet mandrels that come with the machine for other
areas on bells utilizing the different tapers.
Fits right in the Z60-14 rod on aprox. 2003 and newer dent machines.
See "Mod Rod"
for updating older machines or click UP (above) and click on and look at the "Z14 Interchangeable
Rod" page.
Here they all are for their portrait.
And here is the Z60-23A
You can see the four
different radii. with the Z60-14D, in a bell.
The 14D fits right into newer Z60-14 mandrels, which have been standard for
a few years now. Many of the older mandrels
have been updated. CLICK HERE
Check out Both the New Z60-23A and Z60-23B rollers from HERE.
The Z60-14D stem mandrel is just $29.50
Ferree's Tools-"the most copied tools in the world"
|
