|
Disc Rollers Z60-28,29 &30
These rollers were developed to make
the power discs work
even better.
After being in the field
a few months, most Repairmen found that the Power Discs
worked so well that they wanted to be able to use them in even more
situations than we had planned on.
So, these special rollers were
designed, one after the other, for different purposes to make more jobs possible,
faster and at the same time providing a better result.
The 5"
extra long straight roller(Z60-28) was made to make doing larger
diameter bells (Fr.Hrn,Br/Eu,etc.) safer and easier.
Install it with about 1/16" clearance from the arm (Z60-9A) In the event your arm gets tired or
you relax, this roller will kind of "catch" the bell so you don't put a crease
in it with back edge of the roller. Basically, this
roller provides more workable area.
The tapered slim roller(Z60-29) was made so when you're doing the bell of a cornet or trumpet, you don't run into the
under side of the engraved area of the bell, further
up the stem and put a crease in it with the edge of the stock 3 1/2" roller.
The convex roller(Z60-30)
was
originally intended for inside saxophone
bells, but if you have it, you may as well use it in cornet and
trumpets, too! You can actually re-curve the flare of the bell where it
had been straightened or made funnel shaped from previous repair attempts.
Pricing +s/h
| ~Description~ |
PART # |
~Price~ |
| 5" Long Straight Roller |
Z60-28 |
$87.50 |
| Tapered Slim Roller |
Z60-29 |
$87.50 |
| Convex Roller |
Z60-30 |
$122.50 |
| Synthetic Lubricant |
Z6 |
$ 7.90 |
Ferree's Tools-"the most copied tools in the world"
|
