Z60-36 Tuba Roller
This is the Z60-36
roller.
The Z60-36 mounted in the Z60-9A Arm.
This roller was especially made
to use with the Z61-11 tuba
arm
but, you can use it anytime, anywhere.
When this roller is used on the Z60,61 dent machine with the Z60-9A
arm (pictured above), and the Z61-11 adjustable tuba arm
with the Z61-13 hard aluminum balls; it is easy to get 100% coverage around the tubing,
inside and out!
To do the inside radius of the
bow; when setting up, you will have to
place this roller under the ball,
and use the pressure adjustment in reverse. Actually you are pulling UP
on the roller to get the dents out of the inside radius of the curve,
all the while retaining the contour of the bow.
You can't do that with the forked roller, you will miss
about the center 1 1/4" or so.
Cost of this
very useful Z60-36 roller is only $82.50+s/h
Ferree's Tools-"the most copied tools in the world"
|
